It’s not what you think!!!!!

I love my husband dearly.

It’s about my new diagonal stitch guide set up!

How many HSTs do you supose you make in a year?
When you consider every snoballball [aka “stitch and flip”], plus every binding you do is the same corner to corner technique, it adds up to alot.

Now, I realise many people have only one [gasp] sewing machine, but I have been blessed to find quite a few. Which is great because having a Butterfly brain, I often flit from project to project. Mostly because some projects get moved up into the que due to some event – like babies. Yeah, lets blame other people!

With my last project, I decided I needed a better diagonal seam sewing set up.

Baby_Kisses_NotReallyWorking

I tried to “finger press” a fold to follow, [unsucessfully] but I ended up just drawing the line corner to corner. Then I decided I didn’t want to waste all those corners, so I sewed a 1/2″ away. You can see where I had to draw another line 1/2″ away from the first line of stitches. I use dissapearing ink, so I have to sew quickly. This is probably why so many people toss these corners after clipping them.

Since my Rocketeer was handy, and I’d been doing my binding on it for awhile now, I decided to use that.  It’s really too awesome of a machine to completely dedicate it to such a menial task, plus having a top loading bobbin, I needed a way to make it removable, that wouldn’t take a bunch of time to set back up.
I already had “The Angler II” but it hangs over the bed of the machine, and you need to use the “key” to align the needle every time you place it on the bed. The bobbin lies under it, so we know what’s going to happen, right?
If I had the kind of patience required to line up the needle every time I changed the bobbin, I could just draw lines on every single piece I wanted to sew like everybody else.
but I am not like everybody else. When I get bored, I start thinking about ways to make my tasks simpler, or at least easier.

I got some cardboard, and traced around the bed. I included the back for more space for the pieces to land, and to make it a tight fit, so I wouldn’t have to line the needle up each time I used it. I then placed The Angler on the bed, and measured how far I wanted my Bed-Mate to extend, and gave that template to my wonderful husband. I can make stuff with wood, and have for years, but in my experience, men like to feel useful and loved, so I “let” him make me stuff.

Rocketeer_BedMate_NeedleSetting_02

After he made it, I used the key to line up the needle, and taped The Angler down with painters tape.

Rocketeer_BedMate_Setup

and you know what?

It’s as wonderful as I thought it would be!

Rocketeer_Binding_SetUp_03

Even sewing binding is easier.

Rocketeer_Binding_SetUp_01

When I ran out of bobbin thread, I simply removed the Bed-Mate by sliding it out, filled the bobbin, slid the Bed-Mate back into place, and alakazam! Back to sewing! Just like magic!

Rocketeer_BedMate

Not only does The Angler have diagonal stitch lines, it has 1/4 stitch lines on each side of the needle!
I added pink glo tape to get a half inch mark, for sewing the other side of Snoballs, and get some FREE HST’s.

Rocketeer_Snoballs_TinyHSTs

The first project, and inspiration for this, was a lot of snoballs, and even though these were only made from 2.5 squares, I had to test it, I stitched another line a half inch away, and made tiny HST’s!

Rocketeer_Snoballs_TinyHSTs_02

Really tiny HST’s

Baby_Kisses_Tiny_HST

So tiny that I bought the 1.5 Bloc-Loc for them.

Cuz if you think I’m gonna try to line up the seams to trim all those tiny squares, . . . then it’s like you don’t know me at all!

Tiny_HSTs

Now what am I gonna do with all those tiny HST’s?

Well . . . another problem I seam to have is that I go to these all-day-sew events every couple of months. I love looking at other peoples projects, machines, fabrics, all of it.
but . . . I never know what to bring with me to sew. I often think as I go, sewing a bit, standing back and looking at it, stopping to do some figuring, having a look-see at my stash, check out my quilty friends on facebook, ect. All of which, I secretly fear would make me look like a lunatic to the other ladies at the sew-in. I need a project that is portable, and planned out, or at least that doesn’t require thinking.

I may have just the thing!

 

#Bedmate #TinyHSTs #WhatToDoWithTinyTriangles

Advertisements

2 thoughts on “New Bed Mate – Diagonal stitching on a Rockteer

  1. This is a great idea, and you made it useful for yourself! Love the whole idea but it seems The Angler II is not available any longer. At least I couldn’t find it. I did a similar thing with a laser light – added it to my machine so I would follow the light when stitching HSTs, etc. ~smile~ Roseanne

    Liked by 1 person

  2. I got it years ago, so they might not, but there is a flower shaped one by Lori Holt available. It has square grids, instead of diagonal lines. I was thinking about using the flower on my FW, then decided to use this one on my Rocketeer instead. The bed-mate also gives me more of a sorely needed ‘lead’ in front of the needle, so it’s easier to line up the fabric.
    I’ve seen those laser lights, and it’s on my list.

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.